Publikationen

 Jahr  Nr.  Autor(en)TitelBeitrag/Patent
2021[80]

Duwe, S.
Tonn, B.

The Effect of Seven Etching Solutions used for the Differentiated Visualization of Complex Microstructures in Low-Alloyed Cast IronPract. Metallogr. 58: 507–538.
2021[79]

Duwe, S.
Liepe, M.
Schrumpf, M.
Tonn, B.
Bähr, R.

A new ductile iron for mechanically and thermally strained rolls Part 2: material development varying Ni, Mo, Cr content using DoEInt. J. Cast Metal. Res.
2021[78]

Liepe, M.
Duwe, S.
Schrumpf, M.
Bähr, R.
Tonn, B.

A new Ductile Iron for mechanically and thermally strained rolls Part 1: Simulation-based process characterization of hot rollingInt. J. Cast Metal. Res.
2019[77]

Liepe, M.
Bähr, R.
Schrumpf, M.
Duwe, S.
Tonn, B.

Verschleißbeständige Gusseisenlegierungen für thermoschockbelastete WalzenMitteldeutsche Mitteilungen 28: 22.
2019[76]

M. Wurlitzer   B. Tonn

Influence of cerium on the microstructure and
mechanical properties of an as-cast and Q&T steel
International Journal of Cast Metals Research,
DOI: 10.1080/13640461.2019.1601416
2018[75]

B. Tonn
J. Lacaze
S. Duwe

Degenerated graphite growth in ductile ironMaterials Science Forum, Vol. 925, pp. 62-69, 2018, DOI: 10.4028/www.scientific.net/MSF.925.62
2018[74]

S. Duwe
B. Tonn

Ductile cast iron with high toughness at low temperaturesMaterials Science Forum, Vol. 925, pp. 334-341, 2018, DOI: 10.4028/www.scientific.net/MSF.925.334
2017[73]B. Tonn
F. Kröger
Examination of Potential of Al-Cu Casting Alloys for High-Temperature ApplicationProceedings of 14th Asian Foundry Congress (2017)
2017[72]

J. A. Gogolin
B. Tonn

Impact of molybdenum on heat-treatment and microstructure of ADI

Materials Science Forum, Vol. 925, pp. 188-195, 2018, DOI: 10.4028/www.scientific.net/MSF.925.188

2017[71]

F. Hengsbach
P. Koppa
M. J. Holzweissig
M. E. Aydinöz
A. Taube
K. P. Hoyer
O. Starykov
B. Tonn
T. Niendorf
T. Tröster
M. Schaper

Inline Additively Manufactured Functionally Graded Multi-Materials - Microstructural and Mechanical Characterization of 316L parts with H13 layersProgress in Additive Manufacturing (2017), DOI: 10.1007/s40964-018-0044-4
2017[70]F. Kröger
B. Tonn
Qualification of Al-Cu Casting Alloys for Application in Permanent Mold Casting ProcessesProceedings of the 2017 Conference of Metallurgists (2017)
2017[69]O. Starykov
J. Wölck
M. Pintore
B. Tonn
W. Volk
Development and validation of a numerical model for intermetallic layer growth during composite casting of Cu-Al-compoundsProceedings of the 6th Decennial International Conference on Solidification Processing (2017)
2017[68]O. Zak
G. Dolinar
B. Tonn
Untersuchungen zum Warmrissverhalten von AlZnMgCu-LegierungenTagungsband 2. Niedersächsisches Symposium Materialtechnik, (2017) Band 4, S. 27-37
2017[67]M. Pintore
O. Starykov
T. Mittler
W. Volk
B. Tonn
Experimental investigations on the influence of the thermal conditions during composite casting on the microstructure of Cu-Al-bilayer-compoundsInter. Metalcast. (2017). DOI:10.1007/s40962-017-0140-0
2016[66]Ch. Böhnlein
B. Tonn
L. Kallien
Darstellung 3-dimensionaler, funktionaler Hohlstrukturen im Druckguss durch GasinjektionGiesserei-Praxis 67 (2016), Nr. 12, S. 531-540
2016[65]L. Dekker
B.Tonn
Occurrence and behavior of Mo-containing precipitations in nodular cast iron at high temperaturesInternational Journal of Cast Metals Research 29 (2016), Nr. 2, S. 85-91, DOI: 10.1179/1743133615Y.0000000024
2015[64]O. Zak
B.Tonn
A. Baesgen
L. Kallien
New Wear Resistant Hypereutectic AlSi4Cu4FeCrMn Alloys for High Pressure Die CastingInter. Metalcast. 9 (2015), Nr. 4, S. 49-57, DOI: 10.1007/BF03356040
2013[63]

H. Zak

B. Tonn
Verbesserung des Warmrissverhaltens der AlZnMgCu-Legierungen unter Nutzung thermodynamischer BerechnungenGIESSEREI-PRAXIS 10/2013, S. 406-411
2012[62]L. Dekker
B. Tonn
S. Janssen
S. Sheng
S. Wanjura
G. Günther
S. Michel
A. Scholz
M. Vierbaum
Gusseisen mit Niob und BauteilPatent EP 2712943 A2, CN103710614A, DE102012217892A1, EP2712943A3, US20140093416 (2012)
2012[61]H. Zak
S. Michel
B. Tonn
A. Scholz
Hochtemperaturkriechverhalten der schmelzmetallurgisch hergestellten dispersionsver-stärkten Kolbenlegierung AlSi12CuNiMgMaterialwissenschaft und Werkstofftechnik 43 (2012), Nr. 3, S. 205–211
2012[60]H. Zak
A. Kazakewitsch
B. Tonn
Dispersionsverstärkung naheutektischer Al-Si-Gusslegierungen durch ultrafeine TiC-PartikelGiesserei-Praxis 63 (2012), Nr. 10, S. 412-417
2011[59]H. Zak
O. Zak
B. Tonn
Entwicklung einer eisenhaltigen Aluminium-Silizium-Legierung zur Herstellung monolithischer Motorblöcke im DruckgießverfahrenGiesserei-Praxis 62 (2011), Nr. 5, S. 206–214
2011[58]A. Wüstenhagen
B. Tonn
Substitution of Nickel by Combined Addition of Cobalt and Zirconium in Alloy A 332Chinesta, F. (Hrsg.); Chastel, Y. (Hrsg.); Mansori, M. E. (Hrsg.): AIP Conference Proceedings Bd. 1315, AIP, (2011), S. 110–115
2011[57]W. Krupa
B. Tonn
Application of Internal Fusible Chills in Thick-Walled Castings Made of EN-GJS with an Optimized MicrostructureChinesta, F. (Hrsg.); Chastel, Y. (Hrsg.); Mansori, M. E. (Hrsg.): AIP Conference Proceedings Bd. 1315, AIP, (2011), S. 627–632
2011[56]L. Dressel
B. Tonn
GJL im Schleuderguss - Optimierung der Prozessstabilität hinsichtlich der Graphitmorphologie bei geringen Wandstärken (Abstract)Gießereitechnik im Motorenbau, 2011, S. 307
2011[55]L. Dekker
B. Tonn
Härtungsmechanismen und Gefügestabilität von GJS-SiMo Werkstoffen zur Anwendung bei hohen Temperaturen (Abstract)Gießereitechnik im Motorenbau, 2011, S. 305
2011[54]L. Dekker
B. Tonn
Härtungsmechanismen und Gefügestabilität von GJS- SiMo Werkstoffen zur Anwendung bei hohen TemperaturenGießereitechnisches Doktorandenseminar Otto-von-Guericke Universität Magdeburg, 2011, S. 43–48
2011[53]S. Hellfeier
B.Tonn
MnS-Ausscheidungen als wichtige Ausgangspunkte für die Graphitkeimbildung in GJL (Abstract)Gießereitechnik im Motorenbau, 2011, S. 311
2011[52]S. Hellfeier
B.Tonn
MnS-Ausscheidungen als wichtige Ausgangspunkte für die Graphitkeimbildung in GJLGießereitechnisches Doktorandenseminar Otto-von-Guericke Universität Magdeburg, 2011, S. 63–68
2011[51]L. Dekker
B.Tonn
Entwicklung einer warmfesten GJS-Gusseisenlegierung zur Herstellung dickwandiger Gussstücke für höchste Anwendungstemperaturen ≥ 500 °CTU Clausthal, Institut für Metallurgie. 2011 (Förderkennzeichen BMBF 03X3510B). – Abschlussbericht
2010[50]L. Dekker
B. Tonn
Keimbildende Wirkung von Antimon in dickwandigem GJS zur Vermeidung von Chunky-GraphitGiesserei-Rundschau 57 (2010), Nr. 11/12, S. 218–221
2010[49]A. Wüstenhagen
B. Tonn
Substitution of Nickel by Combined Addition of Cobalt and Zirconium in Alloy A 332Proceedings of the 12th International Conference on Aluminium Alloys, (2010), S. 1319–1323
2010[48]H. Zak
B. Tonn
M. Hampel
Einfluss des Kupfers auf das Warmrissverhalten von höchstfesten AlZnMgCu-LegierungenGiesserei-Praxis (2010), Nr. 9, S. 263–266
2010[47]A. Baesgen
L. Kallien
B. Tonn
H. Zak
O. Zak
Verfahren zur prozesssicheren und kosteneffektiven Herstellung von verschleißbeanspruchten Aluminiumgussteilen im Druckguss - Teil 2: Qualifizierung der modifizierten Legierung AlSi17Cu4Mg für das DruckgießenDruckguss (2010), Nr. 4, S. 95–101
2010[46]A. Wüstenhagen
B. Tonn
Substitution von Nickel durch die kombinierte Zugabe von Kobalt und Zirkonium in der Kolbenlegierung AlSi12CuNiMgVDI-Berichte Nr. 2109, (2010), S. 301–304
2010[45]H. Zak
B. Tonn
Optimierung der Wärmebehandlung von Zylinderköpfen aus AlSi10Mg(Cu)Giesserei-Praxis 61 (2010), Nr. 4, S. 105–111
2009[44]B. Tonn
L. Dekker
New Insights on the Influence of Trace Elements on Nucleation and Grain Growth in Cast Iron MeltsLivarski vestnik 56 (2009), Nr. 4, S. 158–176
2009[43]H. Zak
B. Tonn
Optimierung von höchstfesten AlZnMgCu-Legierungen für den KokillengussGiesserei-Praxis 60 (2009), Nr. 11, S. 349–353
2009[42]B. Tonn
A. Sommerfeld
W. Krupa
Kristallisation von Gusseisen - Einsatz neuer UntersuchungsmethodenGiesserei-Praxis (2009), Nr. 6, S. 193
2009[41]O. Zak
B. Tonn
Feinung des Primärsiliziums durch kombinierte Zugabe von Phosphor und Titan bzw. Phosphor und ZirkoniumGiesserei-Praxis 60 (2009), Nr. 9, S. 281–284
2009[40]H. Zak
B. Tonn
S. Kores
Warmfeste Aluminiumgusslegierungen für Zylinderköpfe in direktem WettbewerbGiesserei-Praxis (2009), Nr. 6, S. 199–202
2009[39]O. Zak
B. Tonn
A. Baesgen
L. Kallien
Verfahren zur prozesssicheren und kosteneffektiven Herstellung von verschleißbeanspruchten Aluminiumgussteilen im Druckguss - Teil 1: Einfluss der Zusatz- und MikrolegierungselementeDruckguss (2009), Nr. 7-8, S. 215–218
2008[38]A. Sommerfeld
B. Tonn
Theory of Graphite Nucleation in Lamellar Graphite Cast IronInternational Journal of Metalcasting 3 (2009), S. 39–47
2008[37]O. Zak
H. Zak
B. Tonn
Gefügebeeinflussung der Legierung AlSi17Cu4Mg durch CalciumcarbidzugabeDruckgusspraxis (2008), Nr. 3, S. 109–112
2008[36]A. Sommerfeld
B. Böttger
B. Tonn
Graphite Nucleation in cast iron melt based on solidification experiments and microstructure simulationsJournal of Materials Science and Technology 24 (2008), Nr. 3, S. 321–324
2008[35]A. Sommerfeld
B.  Böttger
B. Tonn
Manganese and Sulphur Influence on the Nucleation of Graphite in Cast Iron MeltsInternational Foundry Research 60 (2008), Nr. 2, S. 2–5
2008[34]H. Schwarze
S. Swoboda
H. Palkowski
K. Rudolph
B. Tonn
K. Gzovskyy
R. Mergen
F. Langbein
Entwicklung innovativer Gleitlagerwerkstoffe auf Al-Bi-Basis (Teil 2)Tribologie und Schmierungstechnik 55 (2008), Nr. 6, S. 12–16
2008[33]H. Zak
B. Tonn
M. Hampl
Häufig verwendete Al-Si-Sekundärlegierungen - Einfluss von Magnesium und Strontium auf die intermetallische Al5FeSi-Phase in der Sekundärlegierung AlSi6Cu4Giesserei-Praxis (2008), Nr. 59, S. 167–173
2008[32]H. Zak
B. Tonn
Die neuen Al-Cu-Basislegierungen für den KokillengussGiesserei-Praxis (2008), Nr. 7-8, S. 249–254
2008[31]B. Tonn
O. Zak
Effect of Different Micro Alloying Elements on the Structure of Hypereutectic Aluminium-Silicon Alloys to Produce Monolithic Engine BlocksHirsch, J. (Hrsg.); Skrotzki, B. (Hrsg.); Gottstein, G. (Hrsg.): Aluminium Alloys Bd. 1, Wiley-VCH, (2008), S. 270–275
2008[30]B. Tonn
H. Zak
Effect of Alloying Elements on Iron-Containing Intermetallics in Al-Si-Mg-Cu 319 and 280 AlloysHirsch, J. (Hrsg.); Skrotzki, B. (Hrsg.); Gottstein, G. (Hrsg.): Aluminium Alloys Bd. 1, Wiley-VCH, (2008), S. 121–126
2008[29]A. Sommerfeld
B. Tonn
Nucleation of Graphite in Cast Iron Melts Depending on Manganese, Sulphur and OxygenInternational Journal of Cast Metals Research 1-4 (2008), Nr. 21, S. 23–26
2008[28]A. Sommerfeld
B. Tonn
Graphite nucleation in grey cast iron meltsCasting Plant and Technology (2008), Nr. 4, S. 2–4
2008[27]C. Reeb
B. Tonn
H. Zak
Alloy Development for Drive Train ApplicationsAluminium Alloys (2008), Nr. 1, S. 121–126
2008[26]A. Mielczarek
W. Riehemann
S. Vogelgesang
B. Tonn
Mechanical and fatigue properties of Cu-Al-Mn shape memory alloys with influence of mechanical cycling and amplitude dependence of internal friction at room temperatureSolid State Phenomena 137 (2008), S. 145–154
2008[25]B. Tonn
K. Gzovskyy
H. Schwarze
S. Swoboda
H. Palkowski
K. Rudolph
Entwicklung innovativer Gleitlagerwerkstoffe auf Al-Bi-Basis (Teil 1)Tribologie und Schmierungs-technik 55 (2008), Nr. 5, S. 5–8
2008[24]S. Kores
H. Zak
B. Tonn
Aluminium alloys for cylinder headsMaterials and Geoenvironment 55 (2008), Nr. 3, S. 307–317
2007[23]L. Ratke
S. Brück
R. Matthiesen
A. Ludwig
M. Gruber-Pretzler
B. Tonn
K. Gzovskyy
L. Granasy
G. Tegze
J. Agren
L. Höglund
L. Arnberg
E. Gust
G. Anger
M. Laurer
R. Garen
B. Reifenhauser
Lead-free bearing alloys for engine applications. Results of the ESA-MAP project MONOPHAS3rd International Conference on Solidification Science and Processing Bd. 3. Jaipur, India : Trans. Indian Institute of Metals, (2007), S. 103–111
2007[22]A. Sommerfeld
B. Tonn
Nucleation in cast iron melts5th Decennial International Conference on Solidification Processing Bd. 5. Sheffield, (2007), S. 467–471
2007[21]O. Zak
H. Zak
B. Tonn
Einsatz von rasch erstarrten Vorlegierungen zur Feinung des Primärsiliziums übereutektischer AlSi17Cu4Mg-LegierungDruckgusspraxis (2007), Nr. 7, S. 303–308
2007[20]S. Vogelgesang
H. Zak
B. Tonn
A. Mielczarek
W. Riehemann
Cu-Al-Mn cast alloys with a high damping capacityInternational Foundry Research 59 (2007), Nr. 3, S. 2–7
2006[19]H. Zak
B. Tonn
S. Vogelgesang
W. Riehemann
A. Mielczarek
Kupferlegierung mit hoher Dämpfungskapazität und Verfahren zu ihrer Herstellung(2006) (PCT/DE 2006/001305). - Patent
2006[18]A. Mielczarek
W. Riehemann
S. Vogelgesang
H. Zak
B. Tonn
Amplitude Dependend Internal Friction of CuAlMn Shape Memory AlloysKey Engineering Materials 319 (2006), S. 45–52
2005[17]B. Tonn
J. Moiseev
L. Ratke
H. Palkowski
H. Schwarze
Aluminium-Gleitlagerlegierung(2005) (PCT/EP 2005/006091). – Patent
2005[16]J. Moiseev
H. Zak
H. Palkowski
B. Tonn
Stranggießen monotektischer Aluminium-Bismut-Werkstoffe für hochbelastbare GleitlagerAluminium 81 (2005), S. 92–97
2005[15]M. Gruber-Pretzler
A. Kharicha
M. Wu
J. Moiseev
B. Tonn
A. Ludwig
Continuous Casting of Hypermonotectic AlZnBi Alloys: Experimental Description and Numerical SimulationWiley-Verlag, (2005)
2005[14]H. Zak
S. Vogelgesang
B. Tonn
Gefügeoptimierung von dickwandigen Gussstücken aus EN-GJS durch Einsatz von schmelzbaren KühlkörpernGiesserei-Praxis (2005), S. 263–266
2004[13]S. Vogelgesang
G.-S. Leo
B. Tonn
Thermal Analysis of Grain Refined BrassLivarski vestnik 51 (2004), S. 133–141
2004[12]J. Moiseev
S. Vogelgesang
H. Zak
H. Palkowski
B. Tonn
Monotekische Aluminium-Basiswerkstoffe für hochbelastete TribosystemeMetall 58 (2004), Nr. 6, S. 375–379
2000[11]B. Leube
L. Arnberg
Modelling of solidification of hypoeutectic and eutectic gray iron for prediction of mechanical propertiesThe Foundation for Scientific and Industrial Research at the Norwegian Institute of Technology. Trondheim, Norwegen, 2000 (STF24 A00594). – SINTEF-Report
1999[10]B. Leube
L. Arnberg
Modelling gray iron solidification microstructure for predicting of mechanical propertiesInternational Journal of Cast Metals Research 11 (1999), Nr. 6, S. 507–514
1998[9]B. Leube
A. Arnberg
R. Mai
Predicting the structure and mechanical properties of gray iron by solidification simulationCasting without Borders, 63rd World Foundry Congress Bd. 16. Budapest, Ungarn, (1998), S. 1–8
1998[8]B. Leube
L. Arnberg
R. Mai
Predicting gray iron microstructure and mechanical properties using solidification simulationModelling of Casting, Welding and Advanced Solidification Processes VIII. San Diego, USA, (1998), S. 463–470
1998[7]B. LeubeManual for solidification programs predicting microstructural parametersThe Foundation for Scientific and Industrial Research at the Norwegian Institute of Technology. Trondheim, Norwegen, 1998 (STF24 A98545). – SINTEF-Report
1998[6]B. LeubePredicting the microstructure and resulting mechanical properties using the solidification simulationThe Foundation for Scientific and Industrial Research at the Norwegian Institute of Technology. Trondheim, Norwegen, 1998 (STF24 A98622). – SINTEF-Report
1997[5]B. Leube
R. Mai
Beitrag zur Modellierung der Abkühlung und Kristallisation eutektischer Gusseisenlegierungen mit LamellengraphitGiessereiforschung 49 (1997), Nr. 3, S. 97–105
1997[4]B. LeubePrediction of gray iron microstructure and mechanical properties using solidification simulationTRANSCOM ‘97. Zilina, Slowakei, 1997, S. 27–30
1997[3]B. LeubeBeitrag zur Modellierung der Abkühlung und Kristallisation eutektischer Gusseisenlegierungen mit LamellengraphitTechnische Universität Bergakademie Freiberg, Diss., 1997
1995[2]B. Leube
R. Mai
Physikalisches Kristallisationsmodell für GusseisenlegierungenGiessereiforschung 47 (1995), Nr. 1, S. 1–5
1995[1]B. Leube
R. Mai
Beitrag zur Vorhersage mechanischer Eigenschaften von Gusseisen mit Lamellengraphit durch die Simulation der Abkühlungs- und ErstarrungsvorgängeWerkstoffprüfung 1995. Bad Nauheim, Deutschland, (1995), S. 553–561