Papers 2000 - today

Sandwich materials

Colombo, C.; M. Harhash; H. Palkowski und L. Vergani (2018) Thermographic stepwise assessment of impact damage in sandwich panels. Composite Structures, (184); 279–287. DOI:https://doi.org/10.1016/j.compstruct.2017.10.001

Harhash, M.(2017) Forming behaviour of multilayer metal/polymer/metal systems. Dissertation, Clausthal-Zellerfeld, Deutschland. DOI:10.21268/20170914-120802

Harhash, M.; Carradò, A.; Palkowski, H. (2017): Mechanical Properties and Forming Behaviour of Laminated Steel/Polymer Sandwich Systems with local inlays – Part 2. Stretching and Deep Drawing. Composite Structures (160), 1081–1094 https://doi.org/10.1016/j.compstruct.2016.10.111

Harms, V.; M. Harhash; A. Carradó und H. Palkowski (2017) Energy Absorption Behavior of Metal/Polymer/Metal Sandwich Crash Structures. Key Engineering Materials (746); 275–281. DOI:https://doi.org/10.4028/www.scientific.net/KEM.746.275

Harhash, M.; V. Harms; A. Carradò und H. Palkowski (2016): Metall-Polymer Sandwichverbunde: nicht nur ein Leichtbaupotential. In: 23. Sächsische Fachtagung Umformtechnik. Den Eigenschaften Form geben, Dresden, Deutschland; 32-41.

Harms, V. (2016) Crashrelevante Bauteile aus metallischen Sandwichen mit unverstärktem Polymerkern. Masterarbeit, Clausthal-Zellerfeld, Deutschland.

Nosova E, Lukonina N, Khramova M, Harhash M, Palkowski H (2016) Stamping Ability of three- and five-layer aluminum-polymer composites. (russ.) Construction of composite materials, 3: 30-37.

Harhash M, Carradò A, Palkowski H (2016) Deep- and Stretch-Forming of Steel/Polymer/Steel Laminates. In: Hausmann J, Siebert M (Hrsg) 2. Int. Conf. "Euro Hybrid Materials & Structures", Kaiserslautern, Deutschland: DGM, 69–74.

Palkowski H, Carrado A (2016) Metal-Polymer-Metal Laminates for Lightweight Application. Key Engineering Materials, Vol. 684: 323-334. DOI:https://doi.org/10.4028/www.scientific.net/KEM.684.323

Harhash M, Carradò A, Palkowski H (2015) Forming Potential of Low-Density Laminates, In: Wiche H, Wesling V, Teichmann C (Hrsg.) 1. Niedersächsisches Symposium Materialtechnik, Clausthal-Zellerfeld, Herzogenrath: Shaker, 53–60.  DOI:10.21268/20160726-095415

Colombo C, Carradó A, Palkowski H, Vergani L (2015) Impact behaviour of 3-layered metalpolymer-metal sandwich panels. Composite Structures, Vol. 133: 140–147. DOI:10.1016/j.compstruct.2015.07.078

Palkowski H, Sokolova O A, Carradò A (2015) Sandwich Materials. In Crolla D, Foster D E, Kobayashi and T, Vaughan N (Hrsg.) (2015) Encyclopedia of Automotive Engineering. John Wiley & Sons Ltd, Chichester, pp. 3183-3200.

Harhash, M., Palkowski, H., Sguazzo, C., Hartmann, S.:  Experimental and numerical investigations of metal/polymer/metal laminates: thermo-mechanical and forming characteristics. In: (Ed.) Clausthaler Zentrum für Materialtechnik, Berichtsband Clausthaler Zentrum für Materialtechnik (Zeitraum 2013-2015), Band 03, Shaker Verlag 2016, 31 – 45

Harhash M, Carradò A, Palkowski H (2014) Lightweight titanium/polymer/titanium sandwich sheet for technical and biomedical application. Materialwissenschaft und Werkstofftechnik, Vol. 45: 1084–1091.  DOI:https://doi.org/10.1002/mawe.201400356

Harhash M, Carradò A, Palkowski H (2014) Forming Limit Diagram of Steel/Polymer/Steel Sandwich Systems for the Automotive Industry. In: Sano T, Srivatsan T, Paretti MW (Hrsg.) (2014) Advanced Composites for Aerospace, Marine, and Land Applications. John Wiley & Sons, Inc, Hoboken, NJ, USA, p. 243–254. DOI:https://doi.org/10.1007/978-3-319-48096-1_20

Harhash M, Sokolova OA, Carradò A, Palkowski H (2014) Mechanical Properties and Forming Behaviour of Laminated Steel/Polymer Sandwich Systems with local inlays – Part 1. Composite Structures, Vol. 118: 112–120. DOI:http://dx.doi.org/10.1016/j.compstruct.2014.07.011

Palkowski H, Carradò A (2014) Three-layered sandwich material for lightweight applications. Emerging Materials Research, Vol. 3: 130–135. DOI:https://doi.org/10.1680/emr.13.00050

Sguazzo C, Harhash M, Grafenhorst M, Palkowski H, Hartmann S (2014) Deep drawing of a layered composite: material characterization and finite-element simulation. PAMM, Vol. 14: 245–246. DOI:https://doi.org/10.1002/pamm.201410110

Munkert H, Voigts F, Wegewitz L, Palkowski H, Maus-Friedrichs W (2013) The interaction of epoxy adhesives with steel surfaces. Materialwissenschaft und Werkstofftechnik, Vol. 44: 36–43. DOI:https://doi.org/10.1002/mawe.201300051

Palkowski H, Carradò A, Sokolova OA (2012) Effects of Surface Roughness and Wettability on the Adhesion in Metal/Polymer/Metal Hybrid Sandwich Composites. In: Ferreira, A. J. M. (Hrsg.) (2012) Mechanics of Nano, Micro and Macro Composite Structures.

Palkowski H, Sokolova OA, Carradò A (2012) Forming Potential of Steel/Polymer/Steel Sandwich Composites with Local Plate Inserts. Materials Science Forum, Vol. 706-709: 681–686. DOI:https://doi.org/10.4028/www.scientific.net/MSF.706-709.681

Sokolova OA, Kühn M, Palkowski H (2012) Deep drawing properties of lightweight steel/polymer/steel sandwich composites. Archives of Civil and Mechanical Engineering, Vol. 12: 105–112.  DOI:https://doi.org/10.1016/j.acme.2012.05.001

Carradò A, Faerber J, Niemeyer S, Ziegmann G, Palkowski H (2011) Metal/polymer/metal hybrid systems: Towards potential formability applications. Composite Structures, Vol. 93: 715–721.  DOI:https://doi.org/10.1016/j.compstruct.2010.07.016

Carradò A, Sokolova OA, Donnio B, Palkowski H (2011) Influence of corona treatment on adhesion and mechanical properties in metal/polymer/metal systems. Journal of Applied Polymer Science, Vol. 120: 3709–3715. DOI:https://doi.org/10.1002/app.33583

Sokolova OA, Carradò A, Palkowski H (2011) Adhesion and Formability of Thin Steel/Polymer/Steel Hybrid Sandwich Composites. In: Hirt G, Tekkaya AE (Hrsg.) (2011) The 10th International Conference on Technology of Plasticity, ICTP 2011, Aachen.

Sokolova OA, Carradò A, Palkowski H (2011) Metal–polymer–metal sandwiches with local metal reinforcements: A study on formability by deep drawing and bending. Composite Structures, Vol. 94: 1–7. DOI:https://doi.org/10.1016/j.compstruct.2011.08.013

Sokolova OA, Kühn M, Palkowski H (2011) Lokale Verstärkungen in blechförmigen Metall/Polymer/Metall Sandwichverbunden. Hochfeste und hybride Materialien. Schnelle Umform- und Fügeverfahren. In: EFB H (Hrsg.) (2011) Hochfeste und hybride Materialien: Schnelle Umform- und Fügeverfahren. EFB, Hannover, S. 111–126.

Carradò A, Sokolova OA, Ziegmann G, Palkowski H (2010) Press Joining Rolling Process for Hybrid Systems. Key Engineering Materials, Vol. 425: 271–281. DOI:https://doi.org/10.4028/www.scientific.net/KEM.425.271

Sokolova OA, Carradò A, Palkowski H (2010) Production of Customized High-Strength Hybrid Sandwich Structures. Advanced Materials Research, Vol. 137: 81–128. DOI:https://doi.org/10.4028/www.scientific.net/AMR.137.81

Lange G, Carradò A, Palkowski H (2009) Tailored Sandwich Structures in the Focus of Research. Materials and Manufacturing Processes, Vol. 24: 1150–1154. DOI:https://doi.org/10.1080/10426910902978977

Palkowski H, Lange G (2008) Production of Tailored High Strength Hybrid Sandwich Structures. Steel research international a journal for steel and related materials, Vol. 79: 178–184.

Palkowski H, Lange G (2007) Creation of Tailored High-Strength, Hybrid Sandwich Structures. Advanced Materials Research, Vol. 22: 27–36. DOI:https://doi.org/10.4028/www.scientific.net/AMR.22.27

H Palkowski, G Lange (Hrsg.) (2007) Herstellung maßgeschneiderter hochfester, hybrider Sandwichstrukturen, Clausthal-Zellerfeld.

Palkowski H, Lange G (2007) Herstellung und Umformverhalten austenitischer Polymerkernsandwichverbunde. Materialwissenschaft und Werkstofftechnik, Vol. 38: 85–89. DOI: 10.1002/mawe.200600111

Palkowski H, Giese P, Wesling V, Lange G, Spieler S, Göllner J (2006) Neuartige Sandwichverbunde – Herstellung, Umformverhalten, Fügen und Korrosionsverhalten. Materialwissenschaft und Werkstofftechnik, Vol. 37: 605–612. DOI: 10.1002/mawe.200600039

Palkowski H, Lange G (2005) Austenetic Sandwich Materials in the Focus of Research: 2nd International Conference Deformation Processing and Structure of Materials, May 26 - 28, 2005, Belgrade, Serbia and Montenegro. In: Romhanji E (Hrsg.) (2005) Proceedings / 2nd International Conference Deformation Processing and Structure of Materials, May 26 - 28, 2005, Belgrade, Serbia and Montenegro, Belgrad, S. 19–28.

Palkowski H, Lange G (2004) Formgebungsuntersuchung – Umformen von Leichtbauwerkstoffen aus austenitischen Metall-Polymer-Verbunden. MM Das Industrie Magazin, Vol. 2004: 34–37.

Palkowski H, Lange G (2005) Tiefziehen von austenitischen Metall-Polymer-Verbunden als Leichtbauwerkstoff. In: (2005) Tagungsband zum 2. Landshuter Leichtbau-Colloquium, Vol. 2, Landshut, S. 223–233.

Nach oben

Biological applications

Reggente M, Masson P, Dollinger C, Palkowski H, Zafeiratos S, Jacomine L, Passeri D, Rossi M, Vrana NE, Pourroy G, Carradò A (2018) Novel Alkali Activation of Titanium Substrates to Grow Thick and Covalently Bound PMMA Layers ACS Appl. Mater. Interfaces 2018, 10 (6), 5967–5977 DOI:10.1021/acsami.7b17008

Reggente M, Natali M, Passeri D, Lucci M, Davoli I, Pourroy G, Masson P, Palkowski H, Hangen U, Carrado A, Rossi M (2017) Multiscale mechanical characterisation of hybrid Ti/PMMA layered materials Colloids and Surfaces A, 532, 244-252, https://doi.org/10.1016/j.colsurfa.2017.05.011

Reggente M, Bonafede I, Pourroy G, Carrado A, Palkowski (2016) Fabrication of hybrid Ti/PMMA materials for skull prosthesis reconstruction. Frontiers in Bioengineering and Biotechnology 4 DOI: 10.3389/conf.FBIOE.2016.01.00686

Carradò A, Palkowski H (2014) Interface and in bulk residual stress analysis in biomedical systems by non-destructive techniques. Surface and Coatings Technology, Vol. 243: 10–14. DOI:https://doi.org/10.1016/j.surfcoat.2012.02.009

Harhash M, Carradò A, Palkowski H (2014) Lightweight titanium/polymer/titanium sandwich sheet for technical and biomedical application
Titan/Polymer/Titan Sandwichbleche für technische und biomedizinische Anwendungen
, Mat.-wiss. u. Werkstofftech. , 45, 12, DOI:10.1002/mawe.201400356

Carradò A, Pourroy G, Rimondini L, Palkowski H (2013) Sandwich material systems: A solution for medical applications? European cells & materials, Vol. 26: 85.

van Le Q, Cochis A, Rimondini L, Pourroy G, Stanic V, Palkowski H, Carradò A (2013) Biomimetic calcium–phosphates produced by an auto-catalytic route on stainless steel 316L and bio-inert polyolefin. RSC Advances, Vol. 3: 11255. DOI:10.1039/C3RA23385E

Palkowski H, Stanic V, Carradò A (2012) Multilayer Roll-Bonded Sandwich: Processing, Mechanical Performance, and Bioactive Behavior. JOM (The Journal of The Minerals, Metals & Materials Society (TMS)), Vol. 64: 514–519.  DOI:https://doi.org/10.1007/s11837-012-0294-4

Carradò A, Palkowski H (2010) Microstructural and Mechanical Investigations on Porcelain-Fused-to-Metal in Multilayer System. Advanced Engineering Materials, Vol. 12: B122–B127. DOI:https://doi.org/10.1002/adem.200980014

Nach oben

Iron & Steel

Buchmayr B, Degner M, and Palkowski H (2018) Future Challenges in the Steel Industry and Consequences for Rolling Plant Technologies Berg- und Hüttenmännische Monatshefte, Jan. 2018, 8 p., DOI:10.1007/s00501-018-0708 

Soliman M, Palkowski H, Nofal A (2017) Multiphase Ausformed Austempered Ductile Iron Arch. Metall. Mater. 62, 2017, 3, 1493-1498, DOI: 10.1515/amm-2017-0231

Soliman M, Ibrahim H, Nofal A, Palkowski H (2016) Effect of thermomechanical processing parameters on phase transformation and hardness of dual matrix ductile iron.  International Journal of Cast Metals Research, in print. DOI:https://doi.org/10.1179/1743133615Y.0000000037

Soliman M, Ibrahim H, Nofal A, Palkowski H (2016) Thermo-mechanically processed dual matrix ductile iron produced by continuous cooling transformation. Journal of Materials Processing Technology, Vol. 227: 1–10. DOI: 10.1016/j.jmatprotec.2015.07.025

Soliman M, Ibrahim H, Palkowski H (2016) Ulta-fine Bainite Steel: Influence of Thermomechanical Processing Parameter. AutoMetForm, Wroclaw, Poland.

Soliman M, Palkowski H (2016) Development of the low temperature bainite. Archives of Civil and Mechanical Engineering, 16: 403-412. DOI:https://doi.org/10.1016/j.acme.2016.02.007

Soliman M, Palkowski H (2016) Influence of Hot Working Parameters of Bainitic Pipeline Steels on the Microstructure Evolution and Tensile Properties. Rolling 2016, Graz.

Soliman M, Palkowski H (2016) Effect of Parameters in the Physical Simulated Rough Rolling Stage on Microstructure Evaluation and Tensile Properties of a Bainitic Pipeline Steel. Materials Science Forum, 854: 3-8. DOI:https://doi.org/10.4028/www.scientific.net/MSF.854.3

Soliman M, Nofal A, Palkowski H (2016) Microstructure Evolution and Mechanical Properties of Ausformed Austempered Ductile Iron. In: Product Development and Innovation, PDI, Cairo.

Soliman M, Palkowski H (2016) Hot Rolling Practice of Multi-Phase Steels. – Chapter in “Rolling of Advanced High Strength Steels”, CRC PRESS (2016).

Orend J, Hageman F, Klose F B, Maas B, Palkowski H (2015) A new unified approach for modeling recrystallization during hot rolling of steel. MSEA A 647: 191-200
DOI:https://doi.org/10.1016/j.msea.2015.08.085

Soliman M, Palkowski H (2015) Influence of hot working parameters on microstructure evolution, tensile behavior and strain aging potential of bainitic pipeline steel. Materials & Design, Volume 88: 759–773. DOI:https://doi.org/10.1016/j.matdes.2015.09.040

Soliman M, Nofal A, Palkowski H (2015) Alloy and process design of thermo-mechanically processed multiphase ductile iron. Materials & Design, Vol. 87: 450–465. DOI:https://doi.org/10.1016/j.matdes.2015.07.159

Soliman M, Palkowski H (2014) A review on development of low temperature bainite. AutoMetForm, Freiberg.

Soliman M, Palkowski H, Nofal A Effect of silicon content in dual-matrix austempered ductile iron on structure development and mechanical properties. In: Proceedings of the OMD 2014.

Soliman M, Ibrahim H, Nofal A, Palkowski H (2014) Effect of Intercritical Annealing on Phase Transformation and Mechanical Properties of Thermo-Mechanically Processed Dual Matrix Ductile Iron. In: The Minerals, Metals & Materials Society (Hrsg.) (2014) TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings. John Wiley & Sons, Inc, Hoboken, S. 959–965.

Soliman M, Ibrahim H, Nofal A, Palkowski H (2014) Effect of Thermo-mechanical Processing Parameters on Phase Transformation and Hardness of Dual Matrix Ductile Iron. In: (2014) Proceeding of the 10th International Symposium on the Science and Processing of Cast Iron (SPCI 10).

Soliman M, Palkowski H (2014) Microstructure Development and Mechanical Properties of Medium Carbon Carbide-free Bainite Steels. Procedia Engineering, Vol. 81: 1306–1311. DOI:https://doi.org/10.1016/j.proeng.2014.10.148

Soliman M, Palkowski H (2013) Controlled Setting of the Transformation Kinetics and the Structure Constituents in Low-Temperature Bainite Steels. In: The Minerals, Metals & Materials Society (Hrsg.) (2013) TMS 2013 Supplemental Proceedings. John Wiley & Sons, Inc, Hoboken, NJ, USA, S. 901–908. DOI:https://doi.org/10.1002/9781118663547.ch112

Soliman M, Palkowski H (2013) Controlling the mechanical properties of super bainite using thermo-mechanical simulation: 4-5 June 2013, Stuttgart. In: Liewald M (Hrsg.) (2013) Proceedings of the International Conference on New Developments in Forging Technology, Stuttgart, S. 337–342.

Soliman M, Palkowski H (2012) Verfahren zum Herstellen eines Bauteils mit bainitischem Gefüge und entsprechendes Bauteil. DE102012017143 B3.

Soliman M, Palkowski H, Nofal A (2012) Effect of aluminium content on phase transformation and mechanical properties of dual matrix, thermo-mechanically processed austempered ductile iron. In: (2012) Proceedings of the 70th World Foundry Congress.

Mostafa H, Soliman M, Palkowski H (2010) Microstructures and mechanical properties of thermo-mechanically processed low temperature bainite with 0.4 wt%-C in steel. In: (2010) Proceedings of the 2nd International Conference on “Super High Strength Steels”.

Soliman M, Asadi M, Palkowski H (2010) Role of Dilatometer in Designing New Bainitic Steels. Advanced Materials Research, Vol. 89-91Vol. 35–40. DOI:https://doi.org/10.4028/www.scientific.net/AMR.89-91.35

Soliman M, Mostafa H, El-Sabbagh AS, Palkowski H (2010) Low temperature bainite in steel with 0.26wt% C. Materials Science and Engineering: A, Vol. 527: 7706–7713. DOI:https://doi.org/10.1016/j.msea.2010.08.037

Soliman M, Palkowski H, Nofal A (2010) Thermo-Mechanically Processed Multi-Phase Ductile Iron: Microstructure Development. Key Engineering Materials, Vol. 457: 199–204. DOI:https://doi.org/10.4028/www.scientific.net/KEM.457.199

Soliman M, Weidenfeller B, Palkowski H (2009) Metallurgical Phenomena during Processing of Cold Rolled TRIP Steel. steel research international, Vol. 80: 57–65. DOI:https://doi.org/10.2374/SRI08SP104

Soliman M, Luesing S, Asadi M, Palkowski H (2008) Thermomechanically Processed TRIP-steel with Bimodal Bainite Structure. In: Associazione italiana di Metallurgia (Hrsg.) (2008) Proceedings of the 3rd International conference on Thermomechanical processing of steels: Plastic deformation & steelmaking. Collana tecnica AIM, Milano.

Soliman M, Palkowski H (2008) On Factors Affecting the Phase Transformation and Mechanical Properties of Cold-Rolled Transformation-Induced-Plasticity–Aided Steel. Metallurgical and Materials Transactions A, Vol. 39: 2513–2527. DOI:https://doi.org/10.1007/s11661-008-9594-2

Soliman M, Palkowski H (2007) Ultra-fine Bainite Structure in Hypo-eutectoid Steels. ISIJ International, Vol. 47: 1703–1710. DOI:https://doi.org/10.2355/isijinternational.47.1703

Palkowski H, Moustafa I, Soliman M (2006) Effect of molybdenum content and thermomechanical processing parameters on the properties of Mo-Nb microalloyed trip steel. In: (2006) Proceedings of the 9th Int. & 4th Europ. Conferences in Steel Rolling.

Palkowski H, Moustafa I, Soliman M, Anhalt M (2006) Effect of Aluminium Content and Heat Treatment Parameters on Mechanical Properties and Phase Transformation of Mo-Nb Micro Alloyed Trip Steel. In: (2006) Proceedings of the 7th International Conference on Production Engineering & Design For Development, PEDD7, Cairo, Egypt.

Degner M, Mauk P, Palkowski H, Schmitz H (2002) Entwicklungen bei der Warmumformung im Ferritgebiet. Stahl und Eisen, Vol. 122: 59–62.

Palkowski H (2002) Warmband als Kaltbandersatz – eine Alternative? In: (2002) Leichtbau durch innovativen Werkstoffeinsatz, Clausthal-Zellerfeld, S. 141–150.

Schaumann TW, Heller T, Palkowski H (2001) Anwendungspotenzial warm- und kaltgewalzter Mehrphasenstähle - Leichtbau mit Stahl. UTF Science III, Vol. 2: 17–22.

Schaumann TW, Palkowski H, Heller T (2001) Kaltprofile aus Mehrphasenstählen bieten Leichtbaupotenziale. Blech Rohre Profile, Vol. 48: 44–47.

Heller, Th., Palkowski, H. und Schaumann, Th.-W. (2000) Anwendungspotenzial warm- und kaltgewalzter Mehrphasenstähle, Fachtagung „Walzprofilieren“, TU Darmstadt

Nach oben

Bake Hardening in Steel

 Mehdi Asadi, Mohamed Soliman, Heinz Palkowski. (2015) Advanced High-Strength Steels: Bake Hardening. Encyclopedia of Iron, Steel and Their Alloys. Taylor and Francis: New York, 2016, p. 16-45. ISBN 9781466511040 - CAT# K14814, Series: Metals and Alloys Encyclopedia Collection

Asadi M, Soliman M, Palkowski H (2015) Bake Hardening of Advanced High Strength Steels. In: Totten GE, Colas R (Hrsg.) (2015) Encyclopedia of Iron, Steel, and Their Alloys. Taylor & Francis.

Asadi M, Palkowski H (2013) Influence of Load Paths and Bake Hardening Conditions on the Mechanical Properties of Dual Phase Steel. In: Zhang L (Hrsg.) (2013) Materials processing fundamentals: Proceedings of a symposium sponsored by the TMS Process Technology and Modeling Committee and Extraction and Processing Division ; held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013. Wiley, Hoboken, N.J, S. 81–88. DOI:https://doi.org/10.1007/978-3-319-48197-5_9

Asadi, M.; Palkowski, H. (2012) "Altering Material Properties", Study of Local Aging Effect on Advanced High Strength Steels, Editor :. A. Adams, in: Academy Publish

Asadi M, De Cooman, Bruno Charles, Palkowski H (2012) Influence of martensite volume fraction and cooling rate on the properties of thermomechanically processed dual phase steel. Materials Science and Engineering: A, Vol. 538: 42–52. DOI:https://doi.org/10.1016/j.msea.2012.01.010

Asadi M, Frommeyer G, Aghajani A, Timokhina I, Palkowski H (2012) Local Laser Heat Treatment in Dual-Phase Steels. Metallurgical and Materials Transactions A, Vol. 43: 1244–1258. DOI:https://doi.org/10.1007/s11661-011-0943-1

Asadi M, Palkowski H (2012) Influence of the Hot Rolling Process on the Mechanical Behaviour of Dual Phase Steel. In: Zhang L, Pomykala JA, Ciftja A (Hrsg.) (2012) EPD Congress 2012. Wiley, New York, S. 1–16. DOI:https://doi.org/10.1002/9781118359341.ch1

Palkowski H, Scheer K, Asadi M, Soliman M (2012) Study of local deformation by embossing and profile rolling. In: (2012) Proceedings of the AutoMetForm.

Asadi M, Palkowski H (2011) Influence of the Hot Rolling Process on the Mechanical Behaviour of Martensitic Steel. Advanced Materials Research, Vol. 409: 653–659. DOI:https://doi.org/10.4028/www.scientific.net/AMR.409.653

Asadi M, Palkowski H (2011) Investigation onlocal mechanical properties in multiphase steels for designing local properties of constructional elements. Metallurgical Science and Technology, Vol. 29: 26–31.Link

Asadi M, Schlosser N, Palkowski H (2011) Study of Bake Hardening Effect on Laser Welded Hot Rolled Ferrite-Bainite Dual Phase Steels. steel research international, Vol. 82: 1304–1309. DOI: 10.1002/srin.201100068

Palkowski H, Schlosser N, Asadi M (2011) Auswirkung des thermischen Fügens auf das Bake-Hardening-Verhalten in Dualphasenstählen. Stahl und Eisen, Vol. 13: 119–135.

Asadi, M.; Schlosser, N.; Palkowski, H.(2010) Creation of High-Strength Structures and Joints”, Use of the aging effect to change the local properties of structure components, in: Trans Tech Publications Inc., (2010), ISBN: 978-0-87849-234-3, Editors: H. Palkowski and K.M. Rudolph,

Asadi M, Palkowski H (2010) Designing Local Properties of Constructional Elements by Local Use of Ageing Effects in Multiphase Steels. Materials Science Forum, Vol. 638-642Vol. 3062–3067. DOI:https://doi.org/10.4028/www.scientific.net/MSF.638-642.3062

Asadi M, Palkowski H (2009) Influence Local Use of Ageing Effects in Multiphase Steels for Designing Local Properties of Constructional Elements. In: The Minerals, Metals & Materials Society (Hrsg.) (2009) TMS 2009 138th Annual Meeting & Exhibition, Annual Meeting Proceedings. John Wiley & Sons, Inc, Hoboken.

Asadi M, Palkowski H (2009) Influence of Thermo-Mechanical Processing Parameters and Chemical Composition. steel research international, Vol. 80: 499–506.

Palkowski H, Brück A (2009) Thermomechanical Processing by Laser in Multiphase Steels. Materials and Manufacturing Processes, Vol. 24: 1147–1149. DOI:https://doi.org/10.1080/10426910903032220

Asadi M, Kugler G, Soliman M, Palkowski H (2008) Effect of Thermo-mechanical Processing Parameters and Chemical Composition on Bake Hardening ability of Hot Rolled Multiphase Steels. In: Associazione italiana di Metallurgia (Hrsg.) (2008) Proceedings of the 3rd International conference on Thermomechanical processing of steels: Plastic deformation & steelmaking. Collana tecnica AIM, Milano.

Asadi, M., Kugler, G., Palkowski, H. (2008) Effect of Thermomechanical Processing Parameters and Chemical Composition on Bake Hardening Ability of Hot Rolled Multiphase Steels  Proc. IAS 2008, 1st Int. Conference on Interstitially Alloyed Steels, Sep.28th-Oct.2nd, 2008, Pohang, South Korea

Palkowski H, Brück A (2008) Local Use of Ageing Effects in Multiphase Steels for Designing Local Properties of Constructional Elements. steel research international, Vol. 79: 172–177. DOI:https://doi.org/10.1002/srin.200806336

Palkowski H, Brück A (2008) Local use of Bake Hardening in Multiphase Steels for improved Properties in Structures and Joints. Journal of Advanced Manufacturing Systems, Vol. 07: 283–285. DOI:https://doi.org/10.1142/S0219686708001425

Palkowski H, Brück A (2008) Lokale Nutzung des Bake Hardening Effektes in Mehrphasenstählen. In: (2008) Intermezzo der Werkstoffe: Die Chance der Wahl für Konstrukteure und Planer ; Tagungsband des 28. EFB-Kolloquiums Blechverarbeitung. EFB, Hannover, S. 157–166.

Palkowski H, Brück A (2007) Material behaviour: Local use of the bake hardening effect. In: (2007) Proceedings of the 3rd International Steel Conference on New Developments in Metallurgical Process Technologies. Steel Institute VDEh, Düsseldorf.

Palkowski H, Brück A (2007) Untersuchung zur örtlichen Beeinflussung der Festigkeitseigenschaften durch gezielte Nutzung des Bake Hardening Effektes. In: Steinhoff K (Hrsg.) (2007) Moderne thermomechanische Prozessstrategien in der Stahlumformung. Verlag Stahleisen, S. 12–23.

Palkowski H, Brück A (2007) Use of Bake Hardening Effects to Change Local Properties of Constructional Elements. Advanced Materials Research, Vol. 22: 17–26. DOI:https://doi.org/10.4028/www.scientific.net/AMR.22.17

Palkowski H, Soliman M, Kugler G (2007) Effect of Thermomechanical Processing Parameters on Bakehardening Ability of Hot Rolled Dual Phase Steels. In: The Minerals, Metals & Materials Society (Hrsg.) (2007) TMS 2007 136th Annual Meeting & Exhibition, Annual Meeting Proceedings. John Wiley & Sons, Ltd, Hoboken, NJ, USA.

Palkowski H, Anke T (2006) Bake hardening of hot rolled multiphase steels under biaxial pre-strained conditions. steel research international, Vol. 77: 675–679. DOI:https://doi.org/10.1002/srin.200606446

Palkowski H, Anke T (2005) Calculability of the Bake Hardening effect of hot rolled multiphase steels. steel research international, Vol. 76: 148–153. DOI:https://doi.org/10.1002/srin.200505987

Palkowski H, Anke T (2005) Influence of Biaxial Prestrain om the Bake Hardening Effect of Hot Rolled Multiphase Steel. In: Bariani PF (Hrsg.) (2005) Advanced technology of plasticity 2005: Proceedings of the 8th International Conference on Technology of Plasticity. Ed. Progetto, Padova.

Palkowski H, Anke T (2005) The Potential of Bake Hardening in Hot Rolled Multiphase Steels. In: Bieler TR (Hrsg.) (2005) Trends in Materials and Manufacturing Technologies for Transportation Industries: Powder Metallurgy Research and Development in the Transportation Industry. TMS, Warrendale, Pa., S. 101–106.

Palkowski H, Anke T (2005) Using the Bake Hardening effect of hot rolled multiphase steels for weight optimised components. In: Hagen I von, Wieland H (Hrsg.) (2005) International Conference on Steels in Cars and Trucks - SCT, Düsseldorf.

Palkowski H, Anke T, Basten I (2004) Investigations on the Bake-Hardening-Effect for Hot Rolled Thin Steel Grades. In: (2004) Proceedings of the 2nd International Conference on Thermomechanical Processing of Steels – TMP 2004.

Nach oben

Magnesium

Khani S, Salehi M T, Samin H R, Aboutalebi M R, Palkowski H (2016) The Effect of Severe Plastic Deformation on the Microstructure and Mechanical Properties of As-Cast AZ31Iranian Journal of Materials Science and Engineering, Vol 13: 29 - 38 DOI: 10.22068/ijmse.13.3.29

El Mahallawy N, Palkowski H (2016) Effect of Zn addition on the microstructure and mechanical properties of cast, rolled and extruded Mg-6Sn-xZn alloysMaterials Science & Engineering A, Accepted manuscript available online

Khania S, Aboutalebib M R, Salehia M T, Samima H R, Palkowski H (2016) Microstructural Development during Equal Channel Angular Pressing of As-cast AZ91Alloy. Materials Science and Engineering:A, Vol. 678: 44-56 DOI:10.1016/j.msea.2016.09.066

El Mahallawy N, Ahmed Diaa A, Akdesir M, Palkowski H (2016) Microstructure and mechanical properties of Mg–6Sn and Mg–6Zn alloys prepared by different processing techniques: a comparative study. Mat.-wiss. u. Werkstofftech. Vol. 47: 37-46 DOI:https://doi.org/10.1002/mawe.201500468

Duwe S (2015) Magnesium Recycling - Entfernung von Nickel aus Magnesium-Aluminium-Legierungen. Kongressband zum 1. Niedersächsischen Symposium Materialtechnik. DOI:10.21268/20160725-161548

Duwe S (2015) Pyrometallurgical Magnesium Recycling by Precipitation of Intermetallic Phases. Chemie Ingenieur Technik, Vol. 87: 1609–1612. DOI:https://doi.org/10.1002/cite.201500069

Duwe S (2015) Herausforderung Magnesiumrecycling: Pyrometallurgische Entfernung kritischer Verunreinigungen. In: Thomé-Kozmiensky KJ, Goldmann D (Hrsg.) (2015) Recycling und Rohstoffe. TK Verlag, Berlin, S. 421–428.

Duwe S (2014) Recycling von Magnesium: Untersuchung thermodynamischer Grundlagen zum Verhalten von Nickel und Zirkon in Magnesium-Aluminium-Legierungen. Papierflieger, Clausthal-Zellerfeld. DOI:10.21268/20150616-122006

El-Mahallawy NA, Bakkar A, Shoeib M, Palkowski H, Neubert V (2008) Electroless Ni–P coating of different magnesium alloys. Surface and Coatings Technology, Vol. 202: 5151–5157. https://doi.org/10.1016/j.surfcoat.2008.05.037

El-Mahallawy NA, Palkowski H, Shoeib M, Maamoun MA, Neubert V, Bakkar A (2006) Corrosion protection of Mg alloy by nanostructure deposits of Ni-P by electroless technique. In: (2006) Proceedings of the 7th International Conference on Production Engineering & Design For Development, PEDD7, Cairo, Egypt.

El-Mahallawy NA, Palkowski H, Maamoun MA, Shoeib M (2004) Electro and electroless coating of magnesium AZ31 sheets; a comparative study. Steel Grips, Vol. 2: 130–139.

Nach oben

Magnesium Strip Casting

Palkowski H, Akdesir M (2014) Effect of Grain Refiners and Casting Thickness on the Microstructure Development and Mechanical Properties of DSC-Cast AZ31B Magnesium Strips**. Advanced Engineering Materials, Vol. 16: 399–405. DOI:https://doi.org/10.1002/adem.201300092

Akdesir M, Palkowski H (2013) Processes and limiting factors for a safe production and rolling of SiC-particle reinforced cast strips. In: Liewald M (Hrsg.) (2013) Proceedings of the International Conference on New Developments in Forging Technology, Stuttgart, S. 343–347.

Zi A, Brokmeier H, Palkowski H (2011) Texture and mechanical properties of strip cast and hot rolled magnesium AZ31. International Journal of Materials Research, Vol. 102: 168–172. DOI:https://doi.org/10.3139/146.110463

Zi A, Palkowski H (2010) Direct strip casting and hot rolling of an AZ31 magnesium alloy. Materials Science and Engineering: A, Vol. 528: 559–565. DOI:https://doi.org/10.1016/j.msea.2010.09.052

Palkowski H, Rucki PM, Brokmeier H, Yi S (2007) A study on the microstructure of strip cast magnesium. Magnesium proceedings of the 7th International Conference on Magnesium Alloys and Their Applications: 357–363.

Palkowski H (2006) Single Belt Casting technology for Semi-Inline Magnesium Sheet Production. In: (2006) Proceedings of the 7th International Conference on Production Engineering & Design For Development, PEDD7, Cairo, Egypt.

Wondraczek L (2005) Untersuchungen zur Herstellung von Magnesiumbändern mit dem DSC-Verfahren. Papierflieger, Clausthal-Zellerfeld, Clausthal.

Wondraczek L, Palkowski H, Brokmeier H (2005) Walzen von im DSC-Verfahren hergestelltem Magnesiumband. Metall, Vol. 59: 543–547.

Palkowski H, Wondraczek L (2004) Direct Strip Casting of Magnesium. Zeitschrift für Metallkunde, Vol. 95: 1080–1086.

Palkowski H, Wondraczek L (2004) Herstellung von Magnesiumband mittels Single-Belt-Caster: Grundlagen und Ergebnisse. Metall, Vol. 58: 794–799.

Palkowski H, Wondraczek L (2003) Magnesium alloys - what comes up what goes around. Steel Grips, Vol. 1: 419–422.

Palkowski H, Wondraczek L (2002) Perspektiven bei der Banderzeugung durch ein magnesiumgerechtes Bandgießverfahren. Metall, Vol. 56: 796–800.

MMC Aluminium

El-Sabbagh AM, Soliman M, Taha MA, Palkowski H (2013) Effect of rolling and heat treatment on tensile behaviour of wrought Al-SiCp composites prepared by stir-casting. Journal of Materials Processing Technology, Vol. 213: 1669–1681. DOI:https://doi.org/10.1016/j.jmatprotec.2013.04.013

Soliman M, El-Sabbagh AM, Taha MA, Palkowski H (2013) Hot Deformation Behavior of 6061 and 7108 Al-SiCp Composites. Journal of Materials Engineering and Performance, Vol. 22: 1331–1340. DOI:https://doi.org/10.1007/s11665-012-0425-7

Taha MA, El-Sabbagh AM, Soliman M, Palkowski H (2013) Rolling of cast Al-SiCp particulate metal matrix composites and strip mechanical properties. Materialwissenschaft und Werkstofftechnik, Vol. 44: 914–917. DOI:https://doi.org/10.1002/mawe.201300121

El-Sabbagh AM, Soliman M, Taha MA, Palkowski H (2012) Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys – SiC fine particulates reinforced composites. Journal of Materials Processing Technology, Vol. 212: 497–508. DOI:https://doi.org/10.1016/j.jmatprotec.2011.10.016

El-Sabbagh AM, Taha MA, Palkowski H (2011) Experimental investigation on rolled stir cast composites of aluminium 6061 and 6082 alloys with silicon carbide particulates. In: (2011) Proceedings of the 1st InterQuadrennial ICF conference in Middle east and Africa, Processing, Performance, and Failure Analysis of Engineering Materials.

Taha MA, El-Mahallawy NA, El-Sabbagh AM, Abdel-Hamid M, Salah M, Palkowski H (2005) Workability (Up-Set Test) of Aluminium Matrix-SiC and Al2O3 Particulate Reinforced Composites Prepared by Casting and Powder Metallurgy. In: (2005) Proceedings of the 12th International Conference on Composites Engineering (ICCE 12).

Nach oben

Gliding Bearing Materials

Schwarze H, Swoboda S, Palkowski H, Rudolph K, Tonn B, Gzovskyy K, Mergen R, Langbein K (2008) Entwicklung innovativer Gleitlagerwerkstoffe auf Al-Bi-Basis (Teil 2). Tribologie + Schmierungstechnik, Vol. 55: 12–16.

Tonn B, Gzovskyy K, Schwarze H, Swoboda S, Rudolph K, Palkowski H (2008) Entwicklung innovativer Gleitlagerwerkstoffe auf Al-Bi-Basis (Teil 1). Tribologie + Schmierungstechnik, Vol. 55: 5–8.

Moiseev J, Zak H, Palkowski H, Tonn B (2005) Stranggießen monotektischer Aluminium-Bismut-Werkstoffe für hochbelastbare Gleitlager. Aluminium, Vol. 81: 92–97.

Moiseev J, Vogelgesang S, Zak H, Palkowski H, Tonn B (2004) Monotektische Aluminium-Basiswerkstoffe für hochbelastete Tribosysteme. Metall, Vol. 58: 375–379.

Nach oben

Tube drawing

Foadian F, Carradó A, et al. (2016) Residual stresses evolution in Cu tubes, cold drawn with tilted dies – Neutron diffraction measurements and finite element simulation. Materials & Design 107: 163–170. DOI:10.1016/j.matdes.2016.06.028

Brokmeier H-G, Carradó A, et al. (2015) Texture gradient in a copper tube at maximum and minimum wall thickness. IOP Conf. Ser.: Mater. Sci. Eng. 82: 12102.  DOI:10.1088/1757-899X/82/1/012102

Carradò A, Foadian F, Palkowski H (2015) Tube Drawing with Tilted and Shifted Die. In: Tekkaya A E, Homberg W, Brosius A (Hrsg.) 60 Excellent Inventions in Metal Forming. Springer Berlin Heidelberg, Berlin, Heidelberg, S. 433–438. DOI:https://doi.org/10.1007/978-3-662-46312-3_67

Foadian F, Carradó A, Palkowski H (2015) Precision tube production: Influencing the eccentricity and residual stresses by tilting and shifting. Journal of Materials Processing Technology 222: 155–162. DOI:10.1016/j.jmatprotec.2015.03.008

Foadian F, Palkowski H (2014) Einfluss der Vorrohr- und Auslaufführung auf die Exzentrizität und Eigenspannungen von Rohren beim Gleitziehen: AiF-17263N Final Report. Clausthal-Zellerfeld.

Carradò A, Brokmeier H, Pirling T, Wimpory RC, Schell N, Palkowski H (2013) Development of Residual Stresses and Texture in Drawn Copper Tubes. Advanced Engineering Materials, Vol. 15: 469–475. DOI:https://doi.org/10.1002/adem.201200161

Palkowski H, Brück S, Pirling T, Carradò A (2013) Investigation on the Residual Stress State of Drawn Tubes by Numerical Simulation and Neutron Diffraction Analysis. Materials, Vol. 6: 5118–5130.  DOI:10.3390/ma6115118

Pirling T, Carradò A, Palkowski H (2011) Residual stress distribution in seamless tubes determined experimentally and by FEM. Procedia engineering 10 (2011): 3080–3085. DOI:https://doi.org/10.1016/j.proeng.2011.04.510

Scheer K, Palkowski H (2013) Einfluss der Vorrohr- und Auslaufführung auf die Exzentrizität und Eigenspannungen von Rohren beim Gleitziehen. Metall, Vol. 67: 521–524.

Palkowski H, Pociecha D, Osika J, Świątkowski K (2010) Wyznaczanie pol odksztalcen w procesie walcowania pielgrzymowego rur miedzianych i aluminiowych (Ermittlung der Verformungsfelder während des Pilgerschrittwalzens von Kupfer- und Aluminiumrohren). Rudy Metale, Vol. R55Vol. 770–775. https://www.infona.pl//resource/bwmeta1.element.baztech-article-AGHM-0021-0005

Pociecha D, Osika J, Świątkowski K, Palkowski H (2010) Zastosowanie modelowania fizycznego do wyznaczania pola odkształcenia w procesie pielgrzymkowego walcowania rur na zimno (Physikalische Modellierung zur Ermittlung des Verformungsfeldes während des kalten Pilgerschrittwalzens von Rohren). In: Świątkowski K, Dańko J (Hrsg.) (2010) Polska metalurgia w latach 2006-2010. Wydawnictwo Naukowe "Akapit", Kraków, S. 514–521.

Osika J, Palkowski H, Świątkowski K, Pociecha D, Kula A (2009) Analysis of material deformation during the new cold tube rolling process realized on the new generation of pilger mills. Archives of Metallurgy and Materials, Vol. 54: 1239–1251.

Carradò A, Duriez D, Barrallier L, Brück S, Fabre A, Stuhr U, Pirling T, Klosek V, Palkowski H (2008) Variation of Residual Stresses in Drawn Copper Tubes. Materials Science Forum, Vol. 571-572Vol. 21–26. DOI:https://doi.org/10.4028/www.scientific.net/MSF.571-572.21

Palkowski H, Brück S (2008) Eigenspannungen und Maßtoleranzen beim Rohrziehen: AiF-13939 Final Report. Clausthal-Zellerfeld.

Pirling T, Carradò A, Brück S, Palkowski H (2008) Neutron Stress Imaging of Drawn Copper Tube: Comparison with Finite-Element Model. Metallurgical and Materials Transactions A, Vol. 39: 3149–3154. DOI:https://doi.org/10.1007/s11661-008-9629-8

Palkowski H, Brück S (2007) Maßtoleranzen und Eigenspannungen beim Rohrziehen. Metall, Vol. 61: 708–713.

Nach oben

Diverse

Harraz, M, El-Mahallawy, N, Abd Elghany, K, Schleser,  M, Palkowski, H, Klingner,A. (2017) Characterization of 3D printed stainless steel SS316L powders joined by TIG-, plasma- and laser welding, J. of Engin. Sc. and Military Technol.  Vol. 1, 2, 91-95, ISSN: 2357- 0954 DOI: 10.21608/ejmtc.2017.1052.1045

Foadian, F, Antoine, C, Palkowski, H (2016) Simulation of Edge Defects Behavior of Slabs in the Sizing Press and Roughing Mill of a Hot Strip Mill, steel research int., 88, 2017, 7, DOI: 10.1002/srin.201600357

Degner M, Palkowski H (2016) Fit for hot and cold rolling of strips, Basics und Exercises. Verlag IMP Inter ´MediaPartners GmbH, Wuppertal.

Palkowski H, Yukhvid V, et al. (2016) Advanced Materials and Processes of Metalworking. IV Int.. Science and Technical Conference METAL PHISICS. Mechanics of Material and Deformation Processes (METALDEFORM-2015), Sept. 14-17, 2015, Samara, Ru, Vol. 684, ISBN-13:978-3-03835-522-9,
doi: 10.4028/www.scientific.net/KEM.684

Li L, Gao C, Chen M Y, Zhang X J, Zhou D J, Palkowski H (2015) Investigation on interface bonding behaviour of thin aluminium clad steel strip. Material Research Innovations 04/2015, 19(S1): 50-55. DOI:https://doi.org/10.1179/1432891715Z.0000000001367

Li L, Chen M Y, Gu L L, Zhou D J, Palkowski H (2015) Investigation on deformation behavior and mechanical properties of Al/Al/Steel clad strip. J. of Plasticity Engineering 04/2015, 22(2):68-73

Rudolph, K.-M. (2014) Herstellung und Einsatz aluminiumplattierter Magnesiumbleche als Halbzeug zum Tiefziehen, Dissertation , TU Clausthal, D 104, Hrsg: Prof. Dr.-Ing. Heinz Palkowski

Akdesir M, Zhou D, Foadian F, Palkowski H (2016) Study of Different Surface Pre-treatment Methods on Bonding Strength of Multilayer Aluminum Alloys/Steel Clad Material. International Journal of Engineering Research & Science (IJOER), Vol. 2: 169-177

Sokolova, O. (2012) Study of metal/polymer/metal hybrid sandwich composites fort he automotive industry, Dissertation , TU Clausthal, ISBN 978-3-86948-263-7, Hrsg: Prof. Dr.-Ing. Heinz Palkowski

Palkowski H, Schmöckel D (2012) Kapitel 5: Zugumformen. In: Hoffmann H, Neugebauer R, Spur G (Hrsg.) (2012) Handbuch Umformen. Hanser, München, ISBN 978-3-446-42778-5.

Asadi, M. (2010) Influence of the Hot Rolling Process on the Mechanical Behavior of Dual Phase Steels, Dissertation, TU Clausthal, 2011, ISBN: 978-3-86948-148-7, Hrsg: Prof. Dr.-Ing. Heinz Palkowski http://d-nb.info/1010872729/34

Palkowski H, Rudolph K (2010) Creation of high-strength structures and joints by setting up local material properties II. ttp Trans Tech Publ, Stafa-Zurich.

Hübner S, Palkowski H, Behrens BA, Bach F, Wesling V, Esderts A, Rudolph K, Voges-Schwieger K, Weiland K, Mielke J, Knigge J, Hagen T, Asadi M, Sokolova OA, Wiche H, Medhurst T, Diebel M (2009) Im Fertigungsprozess lassen sich Bauteile spezifisch optimieren. MM Maschinenmarkt, Vol. 44: 26–29.

Mayr, A. (2009) Graphitausscheidungen in indefiniten Eisen-Gusswerkstoffen für Walzen, Dissertation , TU Clausthal, 2009, ISBN978-3-86948-081-7, Hrsg: Prof. Dr.-Ing. Heinz Palkowski

H Palkowski (Hrsg.) (2009) 7. Industriekolloquium "Potenziale metallischer Werkstoffe lokal nutzen". 25. und 26. November 2009 in Clausthal-Zellerfeld. TU Clausthal, Inst. für Metallurgie, Clausthal-Zellerfeld.

H Palkowski (Hrsg.) (2007) 6. Industriekolloquium "Hochfeste Strukturen" SFB 675. 19. und 20. November 2007 in Clausthal-Zellerfeld. TU Clausthal, Inst. für Metallurgie, Clausthal-Zellerfeld.

Palkowski H, Rudolph K (2007) Creation of high-strength structures and joints by setting up local material properties. Trans Tech Publications; ttp Trans Tech Publ, Stafa-Zurich, Switzerland, Enfield, N.H. DOI:https://doi.org/10.4028/www.scientific.net/AMR.22.1

Soliman, M. (2007) Phase Transformations and Mechanical Properties of New Austenite-Stabilised Bainite Steels, Dissertation , TU Clausthal, ISBN 978-3-923605-58-7 , Hrsg: Prof. Dr.-Ing. Heinz Palkowski http://d-nb.info/989028798/34

Brüx, U. (2007) Mikrostrukturen und Eigenschaften ultrahochfester Leichtbaustähle auf der Basis Fe-Mn-Al-C, Dissertation , TU Clausthal, ISBN 3-923605-36-6, Hrsg: Prof. Dr.-Ing. Heinz Palkowski

Lange, G. (2006) Beitrag zum Umformverhalten von dreischichtigen austenitischen Sandwichverbunden mit polymerer Kernschicht, Dissertation , TU Clausthal, ISBN978-3-923605-28-5, Hrsg: Prof. Dr.-Ing. Heinz Palkowski http://edok01.tib.uni-hannover.de/edoks/e01dd01/519158857.pdf

H Palkowski (Hrsg.) (2005) 5. Industriekolloquium "Fertigen in Feinblech" SFB 362: Werkstoffe, Verfahren, Konzepte. 23. und 24. November 2005. Techn. Univ. Clausthal, Clausthal-Zellerfeld.

Doege E, Behrens BA, Sunderkötter C, Springub B, Palkowski H (2004) Application of Load Adjusted Flow Curves in the FE-Simulation and Verification with Experimental Results. In: (2004) Proceedings IDDRG International Deep-Drawing Research Group, Sindelfingen, S. 397–405.

Knap Matjaz, Kugler G, Palkowski H, Turk R (2004) Prediction of Material Spreading in Hot Open-Die Forging. steel research international, Vol. 75: 405–410.  DOI:https://doi.org/10.1002/srin.200405787

H Palkowski (Hrsg.) (2004) 4. Industriekolloquim "Fertigen in Feinblech Multi-Material-Design" SFB 362: Werkstoffe, Verfahren, Konzepte. 11. und 12. Februar 2004 in Clausthal-Zellerfeld. GRIPS Media, Bad Harzburg.

Palkowski H, Kleiber M, Groth C (2003) Research on the temperature conditions for cold forming of non-ferrous wires in the drawing and continuous annealing process by means of simulation and production results. In: (2003) Proceedings of the CADFEM Users Meeting 2003.

Degner M, Palkowski H (2002) Schmierung im Walzspalt bei der Fertigung von Warmbreitband. Der Kalibreur, Vol. 63: 53–64.

Doege E, Zenner H, Palkowski H, Hatscher A, Schmidt-Jürgensen R, Kulp S, Sunderkötter C (2002) Einfluss elastischer Kennwerte auf die Eigenschaften von Blechformteilen. Materialwissenschaft und Werkstofftechnik, Vol. 33: 1–6. https://doi.org/10.1002/1521-4052(200211)33:113.0.CO;2-S DOI:https://doi.org/10.1002/1521-4052(200211)33:11<667::AID-MAWE667>3.0.CO;2-S

Degner M, Frank A, Friedrich K, Palkowski H, Thiemann G (2001) Eingesetzte Messtechniken und angepasste Prozessführung in Warmbreitbandstrassen zur Optimierung der Dickentoleranzen. Stahl und Eisen, Vol. 121: 71–77.

Degner M, Engl B, Jackel I, Palkowski H (2000) Meform 2000 - Herstellung von Bandern und Blechen. Stahl und Eisen: 99–102.

Turk R, Kugler G, Knap Matjaz, Palkowski H (2000) Hot-forging-simulator, data-based on 30MN open die forging press. In: Turk R, Kugler G, Knap Matjaz, Palkowski H (Hrsg.) (2000) Proceedings of the 4th German-Slovenian seminar on joint projects in material science and technology, S. 62–63.

Nach oben
 

Anfahrt  Kontakt  Suche  Sitemap  Datenschutz  Impressum  Verantwortlich: Alexander Bomm
© TU Clausthal 2018